New project aims to recover aromatics from automotive shredder residue

Share:

Covestro AG (Leverkusen, Germany), the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT (Oberhausen, Germany), and Carbon Minds GmbH (Cologne, Germany) have launched the CARBEX research project. The joint project aims to validate a recycling process for recovering the aromatics benzene, toluene, ethylbenzene and xylenes (BTEX) from automotive shredder residue (ASR) — a waste stream from automotive recycling that is still largely incinerated today. Covestro is leading the project’s industrial activities.

BTEX aromatics are essential building blocks to the chemical sector. Covestro uses benzene as a feedstock to create MDI (methylene diphenyl diisocyanate) and toluene to create TDI (toluene diisocyanate). MDI is applied, to instance, to make insulation foams to buildings and refrigerators, as well as structural and acoustic components to vehicles. TDI is applied to create flexible foams to mattresses, upholstered furniture and car seats.

At the end of a vehicle’s life, components like these, which contain significant amounts of polyurethane, can end up back in automotive shredder residue. This means CARBEX could help close the loop in automotive recycling.

Source: Covestro

“With CARBEX, we are tapping into a source of carbon that is currently mostly burned,” says Dr. Stefanie Eiden, project manager at Covestro. “If we can recover benzene and toluene from automotive shredder residue at the condition required to our MDI and TDI production processes, we can close a material loop while replacing an releases-intensive measure in the production of basic chemicals.”

Aromatics are mainly produced today through the steam cracking of fossil-based naphtha. In Germany alone, this process generates around 8 million metric tons of CO₂e in direct process releases every year, in addition to approximately 11 million metric tons associated with crude oil extraction and naphtha production.

At the same time, greater than 466,000 metric tons of ASR are generated in Germany each year. Around 210,000 metric tons are applied to energy recovery or disposed of. On average, polyurethane accounts to 20% of this discarded materials stream by weight, while the share can vary significantly depending on its source.

CARBEX is based on Fraunhofer UMSICHT’s patented Pyromat methodology. It combines pyrolysis with a subsequent autocatalytic reforming process, in which the pyrolysis coke generated during the process itself is applied as both a catalyst and an adsorbent.

At temperatures of around 500°C, components of the coke such as calcium carbonate, titanium dioxide and copper promote the formation of aromatic compounds. At the same time, they bind halogens such as chlorine and bromine, preventing them from entering the pyrolysis oil. This eliminates the need to an expensive external catalyst, which would rapidly lose its effectiveness due to contaminants in real-world discarded materials streams.

In preliminary laboratory-scale tests using ASR, Fraunhofer UMSICHT

Quick inquiry

Create

Inquiry Sent

We will contact you soon