CR-3D: Carbon fiber reinforced PPS filament with W?rmeformbest? andness up to 250?C

Share:

CR-3D from Cham is presenting the "PPS CF10" filament for Formnext 2026. The material is based on polyphenylene sulfide (PPS) and contains 10 percent carbon fibers. It belongs to the "FlameX" material series for flame-proof and "CarbX" for fiber-reinforced filaments. Technical components with high thermal, mechanical and chemical requirements are planned.

traits and Applications

According to the manufacturer, the heat deflection temperature is 250°C according to ISO 75. It should not be equated with a generally permissible continuous operating temperature. The tensile strength is 100 MPa, and the Young’s modulus is 8,000 MPa. to the fire behavior, the material class V-0 according to UL 94 is mentioned. This does not replace a fire security assessment of the printed component.

CR-3D exhibits the aquatic environments, dilute acid, alcohol, and acetone resistance typical of PPS. The specific suitability is determined by the operating conditions. The manufacturer cites sensor and actuator housings, pump and valve components, as well as fixtures in tool and mold making, among other applications.

Processing

The manufacturer recommends a nozzle temperature of 300 ° C, a 100 ° C warm pressure bed, a closed installation space and a hardened nozzle from 0.6mm. The filament should be dried at 90 ° C to twelve hours beforehand. It is available in black on spools of 1 and 2 kilograms.

Formnext 2026

Quick inquiry

Create

Inquiry Sent

We will contact you soon