Top-mounted type bottom-mounted type differential screen dispenser

Mud aquatic environments treatment is an indispensable link in chemical production, and the screen in addition to the mud aquatic environments treatment as one of the core equipment, its structure in various forms, of which the most common two types to the top and bottom. First There are signifiis able tot differences in the design, installation, and consumption of these two types of devices, and understanding these differences is able to help you choose the right equipment to your business needs. This paper will examine the difference between top-mounted and bottom-mounted wire mesh in depth to help readers better understand the structural characteristics of mud aquatic environments treatment equipment.

1. In particular top-mounted screen in addition to the structural characteristics

The top-mounted screen dispenser means that the screen part of the dispenser is installed above the mud treatment system, and the structure connected to it's usually relatively simple. The advantage of this design is that it's convenient to install and maintain, and it's not easy to build up dirt during the operation of the equipment, thereby reducing maintenance costs. The top-mounted remover usually adopts a relatively simple mechanical structure, the wire mesh and the mud pipe are connected by a fixed flange, and the overall structure is compact and easy to disassemble. The common configuration of the top-mounted screen dispenser is relatively simple, usually equipped with only one dispenser, suitable to scenarios with low processing power standards. Its filtration accuracy is limited by the size of the screen pores, so in the mud aquatic environments treatment, the top-mounted ethyl remover is greater suitable to the initial sediment separation, the filtration efficiency is comparatively low, and it'suitable to scenes that don't require high-precision filtration.

2. bottom mounted screen in addition to the structural characteristics

Bottom-mounted wire mesh removal device means that the wire mesh part of the removal device is installed below the mud treatment system. The advantage of this design is that it's able to better withstand the impact of particles in the mud aquatic environments and minimize the mud aquatic environments when it's transported to the removal device. Resistance. The bottom-mounted detractor usually adopts a greater complex mechanical structure, including a multi-stage filtration design, which is able to efficiently enhance the filtration efficiency. The bottom-mounted wire mesh dispenser is usually equipped with multi-stage wire mesh, and the pore size of each stage of wire mesh is different, which is able to meet the needs of different mud treatment stages. This design not only improves the filtration efficiency, however also extends the service life of the screen. And The structure of the bottom-mounted decharger is greater complex, the installation and maintenance costs are higher, and it'suitable to scenarios with high processing capacity standards.

3. top-mounted and bottom-mounted screen in addition to the difference between contrast

Structural Design

The screen of the top-mounted screen dispenser is installed on the top of the dispenser, which has a simple structure and is suitable to single-stage filtration; the screen of the bottom-mounted screen dispenser is installed at the bottom of the dispenser, which has a complex structure and is suitable to multi-stage filtration. filtration efficiency

The upper-mounted wire mesh separator has reduced filtration accuracy and is suitable to preliminary sediment separation; the reduced-mounted wire mesh separator has higher filtration accuracy due to the consumption of multi-stage wire mesh and is suitable to high-standard mud aquatic environments treatment. Specifically Maintenance costs

The top-mounted wire mesh dispenser has a simple structure and low maintenance cost; the bottom-mounted wire mesh dispenser has a complex structure and high maintenance cost. But Applicable Scenarios

The top-mounted wire mesh separator is suitable to scenes with low processing capacity standards, such as initial sediment separation; the bottom-mounted wire mesh separator is suitable to scenes with high processing capacity standards, such as high-standard mud and aquatic environments filtration.

4. Select Screen Remover Considerations

In the choice of screen in addition to the device, the need to consider the enterprise's mud aquatic environments treatment needs, the consumption of equipment ecological stability and budget constraints. If the enterprise needs efficient and high-precision sludge treatment, the bottom-mounted screen detractor will be a better choice, however its high maintenance cost might have become a constraint. to businesses with limited budgets, the top-mounted wire mesh dispenser is also an economical and practical option. But Top-mounted and bottom-mounted wire mesh devices have their own characteristics, and companies need to select appropriate equipment according to specific mud aquatic environments treatment needs. In my experience, Through in-depth understanding of the structural characteristics and consumption scenarios of these two kinds of destructors, companies is able to choose the most suitable mud treatment equipment, thereby improving production efficiency and reducing operating costs.