KraussMaffei Extrusion: One-stage process for PVC roofing sheets lowers energy requirements

Share:

The new PVC inline mixing for the economic production of PVC roofing sheeting.-(All pictures: KraussMaffei) The new PVC inline mixing for the economic production of PVC roofing sheets.-(All images: KraussMaffei)KraussMaffei Extrusion has developed a continuous process for the production of PVC roofing sheets, which replaces the separate dryblend preparation. In the process referred to as "PVC inline mixing", all solid and liquid formulation components are introduced directly into the extrusion process via gravimetric dosing systems. According to the company, the energy requirement can be reduced by up to 75 percent compared to the conventional two-stage process. The actual savings therefore depend on the recipe, system parameters and location.

In conventional production, PVC powders, plasticizers, additives and fillers are first prepared in batches in a heating-cooling-mixer combination to form a dry blend. After cooling and intermediate storage, the mixture is plasticized in the twin-screw extruder and processed into strips. This separate premixture is omitted in the single-stage process; the material only needs to be heated once.

As a result, the investment in the heating-cooling-mixer combination and its maintenance can be omitted. According to KraussMaffei, space and personnel standards are also falling. Specific investment costs and payback periods are not provided. Recipe adjustments and color changes can be made via the integrated manage during ongoing operation. There is no need to the preparation and interim storage of separate Dryblend batches.

The process was developed and tested with manufacturing roofing formulas in the methodology center in Laatzen. A two-screw extruder of the type "ZE 65 Blue Power" with gravimetric differential dosing to the solids and several fluid dosages was utilized. The "ZE Blue Power" series has a ratio of screw inside diameter of 1.65. According to the manufacturer, high torque and a substantial free volume enable the processing of various formulations.

According to the company, the tests with several recipes achieved the required degree of gelling of the PVC as well as the manufacturing standards to mechanical traits and weldability of the webs. The company does not name quantitative test results.

The process is already utilized in an manufacturing production line. According to KraussMaffei Extrusion, the reference system achieves a total throughput of 1,800 kg/h with two extruders and two smoothing units. In addition to PVC, additives and fillers, the resulting edge pruning is also continuously processed immediately into finished strips.

Quick inquiry

Create

Inquiry Sent

We will contact you soon